Zaun Limited

Company Summary:

Secured by Design status is restricted to companies or products that have been successfully tested to the high standards set by Secured by Design and meet Police Preferred Specification.

Contact:

Zaun Limited
  • Steel Drive
  • Wolverhampton
  • West Midlands
  • WV10 9ED

Regions Serviced:

  • United Kingdom
  • West Midlands

Products & Services:

    Physical Perimeter Security

  • Armaweave Woven Mesh Fencing System

      Description:

      12mm x 50mm pattern – 5mm high tensile wire

      Approved Standard:
          SBD or Specialist Assessed
        • Type:
          • n/a
        • Material:
          • n/a
    • Duo 8 Welded mesh security fencing system (mounted using in ground or base plated posts)

        Description:

        Available at 2.0m and 2.4m heights. Internally cranked topping available at 2.4m only

        Approved Standard:
            LPS 1175: Issue 6: 2007
            • Specification for testing and classifying the burglary resistance of building components, strongpoints and security enclosures and free standing barriers
            • Compliance Note: (LPCB Approval 1164a refers) SR1 achieved
        • Type:
          • n/a
        • Material:
          • n/a
    • Hi Sec Super 6 Welded Mesh Fencing System

        Description:

        4mm horizontal, 6mm vertical Wires

        Approved Standard:
            SBD or Specialist Assessed
          • Type:
            • n/a
          • Material:
            • n/a
      • Hi Sec Welded Mesh Fencing System

          Description:

          4mm horizontal, 4mm vertical Wires

          Approved Standard:
              SBD or Specialist Assessed
            • Type:
              • n/a
            • Material:
              • n/a
        • HiSec 358 Welded mesh security fencing system (mounted using in ground square sectioned, base plated square sectioned, in ground rectangular sectioned or in ground base plated rectangular sectional posts)

            Description:

            Available at 2.0m, 2.4m and 3.0m heights

            Approved Standard:
                LPS 1175: Issue 6: 2007
                • Specification for testing and classifying the burglary resistance of building components, strongpoints and security enclosures and free standing barriers
                • Compliance Note: (LPCB Approval 1164a refers) SR1 achieved
            • Type:
              • n/a
            • Material:
              • n/a
        • HiSec Super 10 Welded mesh security fencing system (mounted using base plated posts and in in ground posts)

            Description:

            Available at 2.4m and 3.0m heights

            Approved Standard:
                LPS 1175: Issue 6: 2007
                • Specification for testing and classifying the burglary resistance of building components, strongpoints and security enclosures and free standing barriers
                • Compliance Note: (LPCB Approval 1164a refers) SR2 achieved
            • Type:
              • n/a
            • Material:
              • n/a
        • PAS 68 Multifence V.1 (Above ground system)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500(N2)/48/90:3.0/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • PAS 68 RDS V.1 (Above ground system)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500(N2)/48/90:11.6/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • Rising Arm Barrier MK2 3m Wide (Manual)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V3500 (N1)/80/90:2.2/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • Rising Arm Barrier MK3 3m Wide (Manual)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500 (N2)/48/90:0.0/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • Rising Arm Barrier MK3 4.5m Wide (Manual)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500 (N2)/48/90:0.0/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • Terror Stopper 1 Bollard 219mm diameter (Static)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500 (N2)/48/90:0.0/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • Terror Stopper 2 Bollard 219mm diameter (Static)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500 (N2)/64/90:4.0/16.7
            • Type:
              • n/a
            • Material:
              • n/a
        • Terror Stopper 3 Bollard 273mm diameter (Static)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500 (N2)/64/90:3.3/0.0
            • Type:
              • n/a
            • Material:
              • n/a
        • Terror Stopper 4 Bollard 273mm diameter (Static)

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
                • Compliance Note: V7500 (N3)/80/90:10.6/11.1
            • Type:
              • n/a
            • Material:
              • n/a
        • Zaun GME Springs Augmented Fence

            Approved Standard:
                PAS 68: 2010
                • Impact test specifications for vehicle security barriers
            • Type:
              • n/a
            • Material:
              • n/a