Zaun
Steel Drive
Wolverhampton
West Midlands
WV10 9ED
T: 01902 796699
E:
W: www.zaun.co.uk
Company
Zaun Limited is the sole remaining manufacturer of welded and woven mesh fencing systems that manufactures the entire system in the UK. Zaun makes the mesh, fencing panels, posts, clamp bars and fixings at its state-of-the-art five-acre production facility in Wolverhampton in the West Midlands. Products have been tested and approved by testing organisations including CPNI, LPCB and Secured by Design.Supply Types
- Commercial Supplier/Installer
Products
Physical Perimeter Security
Product Description: Single Layer Armaweave Mesh Fence, 3.0m High with a further 0.9m Diameter Barbed Tape Coil Topping, 4mm Diameter Wires with a Centre to Centre Wire Spacing of 12.7mm Square
Types- Fence
- Steel
- Specialist Assessed
Product Description: Single Layer Armaweave Mesh Fence, 3.0m High with a further 0.9m Diameter Barbed Tape Coil Topping, 5mm Diameter Wires with a Centre to Centre Wire Spacing of 12.7mm Square by 50mm
Types- Single-leaf
- Fence
- Steel
- Specialist Assessed
Product Description: Triple Layer Armaweave Mesh Fence, 3.6m High with a further 0.9m Diameter Barbed Tape Coil Topping, 4mm Diameter Wires with a Centre to Centre Wire Spacing of 12.7mm Square
Types- Fence
- Steel
- Specialist Assessed
Product Description: Triple Layer Armaweave Mesh Fence, 3.6m High with a further 0.9m Diameter Barbed Tape Coil Topping, 5mm Diameter Wires with a Centre to Centre Wire Spacing of 12.7mm Square by 50mm
Types- Fence
- Steel
- Specialist Assessed
Product Description: Concrete, Steel Safety Barrier
Types- Vehicle blocker
- Above ground
- Steel
- Concrete
- Successfully tested and approved to: PAS 68:2010
Certification held with CPNI Report CPR1221 Test TRL027 refers
Product Description: Welded Mesh Secuirty Fencing System Mounted Using Base Plated Posts, Using In-Ground Posts
Types- Above ground
- Fence
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 8 C5 SR3 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164f refers
Product Description: Welded Mesh Secuirty Fencing System Mounted Using Base Plated Posts, Using In-Ground Posts
Types- Fence
- Welded Mesh
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 D10 SR4 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164g refers
Product Description: Double Leaf Inward Opening Padlockable Hinged Gates with Base Plated Posts with Buried In-Ground Posts
Types- Double leaf
- Gate
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164h refers
Product Description: Single and Double Leaf Inward Opening Padlockable Hinged Gates with Base Plated Posts with Buried In-Ground Posts
Types- Double-leaf
- Gate
- Single-leaf
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164h refers
Product Description: Weld Mesh Security Fencing System Mounted Using In-Ground Posts, Base Plated Posts, For High Wind Load, with Integral Cranked Topping
Types- Fence
- Welded Mesh
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164c refers
Product Description: Double Leaf Inward Opening Padlockable Hinged Gates with Base Plated Posts with Buried In-Ground Posts
Types- Double-leaf
- Gate
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164i refers
Product Description: Single and Double Leaf Inward Opening Padlockable Hinged Gates with Base Plated Posts with Buried In-Ground Posts
Types- Double-leaf
- Gate
- Single-leaf
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164i refers
Product Description: Weld Mesh Security Fencing System Mounted Using In-Ground Square Sectioned Posts, Base Plated Square Sectioned Posts, Base Plated Rectanguler Sectioned Posts
Types- Fence
- Welded Mesh
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164d refers
Product Description: Welded Mesh Fence, 3.0m High with a Further 0.9m Diameter Barbed Tape Coil, 6mm Diameter Vertical Wires a Centre to Centre Wire Spacing of 12.6mm and 4mmDiameter Horizontal Wires with a Centre to Centre Spacing of 76.2mm
Types- Welded Mesh
- Fence
- Steel
- Specialist Assessed
Product Description: Double Leaf Inward and Outward Opening Padlockable Hinged Gates with Base Plated Posts with Buried In-Ground Posts
Types- Double-leaf
- Gate
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164e refers
Product Description: Single Leaf Inward and Outward Opening Padlockable Hinged Gates with Base Plated Posts with Buried In-Ground Posts
Types- Gate
- Single-leaf
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164j refers
Product Description: Welded Mesh Secuirty Fencing System Mounted Using Base Plated Posts, Using In-Ground Posts
Types- Fence
- Welded Mesh
- Above ground
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate C1164e refers
Product Description: MKIII 3M Wide - Vehicle Mitigation
Types- Vehicle blocker
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR078 V4 Test B3773 refers
Product Description: MKIII 4.5M Wide - Vehicle Mitigation
Types- Vehicle blocker
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR234 V4 Test B3925 refers
Product Description: MKII 3M Wide - Vehicle Mitigation
Types- Vehicle blocker
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR037 V2 Test B3695 refers
Product Description: Static 219mm Diameter - Vehicle Mitigation
Types- Vehicle blocker
- Vertical bar
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR481 V6 Test B4125 refers
Product Description: Static 219mm Diameter - Vehicle Mitigation
Types- Vehicle blocker
- Vertical bar
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR258 V5 Test B3945 refers
Product Description: Static 273mm Diameter - Vehicle Mitigation
Types- Vehicle blocker
- Vertical bar
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR645 V6 Test B4240 refers
Product Description: Static 273mm Diameter - Vehicle Mitigation
Types- Vehicle blocker
- Vertical bar
- Above ground
- Steel
- Certified to: PAS 68:2010 Impact test specifications for vehicle security barriers
Certification held with TRL Report CPR777 V6 Test B4310 refers